Beaver County · Southern Utah

Custom Home Builder in Beaver, Utah

Beaver, the Beaver County seat, is the gateway to the Tushar Mountains and Eagle Point. Historic homes, open land and mountain views make it a great place to build.

  • 25+ years building custom homes
  • 45-minute complimentary planning call
  • Weekly photo progress updates
LocationBeaver, UT
CountyBeaver
Elevation~5,909 ft
Population3,592

The area

Building a custom home in Beaver, Beaver County

From our Cedar City office to Beaver

About 52 miles north on I-15 (exits 109 and 112), roughly 55 minutes. That keeps Beaver inside our regular build area, so site visits, deliveries and inspections stay on a normal schedule.

What Beaver is known for

The 1882 Beaver County Courthouse (now a museum), the Farnsworth cabin and Beaver Opera House beside it, the hillside 'B', and the Tushar Mountains and Eagle Point ski resort east of town via SR-153.

Local facts

Custom homes in Beaver: permits, water and ground

What we check for every Beaver lot before design starts. Rules and fees change, so we confirm the current requirements for your parcel with the office that has jurisdiction.

Permits and who issues them

Inside city limits (parcel numbers starting 03-), Beaver City handles zoning, permit applications, scheduling and payment; Beaver County Building Department (105 East Center St performs inspections under contract.

Water, sewer and septic

Beaver City has its own Water & Sewer Department. City zoning for rural residential districts requires city water (8-inch line minimum) and connection to the city wastewater system unless septic is allowed at densities of one unit per 1 to 5 acres.

Snow, frost and climate

Beaver County plan requirements: 30 lb roof snow load, 30-inch frost depth, 90 mph 3-second gust wind, Exposure C, seismic zone D. Utah's state table lists Beaver at 35 psf ground snow (5,886 ft). January mean low is 15.6 F.

Ground and site conditions

USGS maps Quaternary faults in the Beaver Basin, including one through town.

Zoning and design rules

City single-family districts: R-1-10 (9,800 sq ft minimum, 80 ft width) and R-1-20 (20,000 sq ft, 120 ft width), 20 ft front setback. Main buildings are limited to 2.5 stories or 35 ft. Rural residential districts are R-R-1, R-R-2.5 and R-R-5. Verify against the official code.

Also worth knowing

Beaver County may require an engineer or architect stamp for unique designs; homes over 2,500 sq ft on the main floor with more than one story must have stamped documents. Permit applications need a PDF plus two full plan sets.

Building in Beaver

What we plan for on Beaver custom homes

Every town around Cedar City builds a little differently. Here is what we plan for on Beaver homes, before a single line of the floor plan is drawn.

01

Four real seasons

Cold winters and warm summers call for a well-insulated home and smart heating choices. We design for year-round comfort.

02

Water, septic and utilities

Many lots outside town rely on wells, septic and longer power runs. We confirm what your land needs during feasibility, before design, so the budget is real.

03

Shops, barns and outbuildings

Garages, shops and barns are common out here. Planning them with the house keeps access, drainage and utilities simple.

Why Summit

A calm, guided build, from first sketch to front door

Summit Building Construction is a locally owned Cedar City builder with 25+ years of custom home experience. You work directly with our team, and every decision is explained in plain language.

  • Clear, honest budgets. Allowances, finishes and options walked through up front. No surprises.
  • Weekly progress updates. Photos, milestones and what is coming next, without visiting the site every day.
  • Design for real life. Storage, traffic flow, aging in place and hosting family, so the home still fits a decade from now.
  • Your lot or ours to find. We help whether you already own land in Beaver or are still searching.

“Summit broke everything into clear steps and handled the details. I always knew what was happening, and our home turned out more beautiful and functional than I imagined.”

Emily & David · Summit homeowners

Our Process

From first conversation to move-in, you will know what is next

  1. Vision + feasibilityComplimentary consultation: wish list, style, budget and timing, and what is realistic on your Beaver lot.
  2. Design + pricingWe work with your architect or ours to finalize plans, then build a detailed budget with allowances.
  3. Build + walkthroughsWe manage permits, trades and schedules. You join key walkthroughs to approve milestones.
  4. Handover + supportMove in with a full orientation, documentation and post-move support.

Summit craftsmanship

Custom homes Summit has built in Southern Utah

Photos from The Juniper Ridge Cabin. See the full projects: The Juniper Ridge Cabin · The Desert Ridge Barndominium · The Heritage Gable Farmhouse.

Questions

Building a custom home in Beaver: FAQ

Do you build custom homes in Beaver, Utah?

Yes. Summit Building Construction builds custom homes in Beaver and across Beaver County. Beaver is about 47 miles from our Cedar City base, well inside the area we serve.

Who issues building permits for a new home in Beaver?

Inside city limits (parcel numbers starting 03-), Beaver City handles zoning, permit applications, scheduling and payment; Beaver County Building Department (105 East Center St performs inspections under contract. We prepare and submit the permit package and schedule the inspections for you.

Will my Beaver lot have city water and sewer, or a well and septic?

Beaver City has its own Water & Sewer Department. City zoning for rural residential districts requires city water (8-inch line minimum) and connection to the city wastewater system unless septic is allowed at densities of one unit per 1 to 5 acres. We confirm what your specific lot needs during feasibility, before design starts.

Are there soil or site conditions to plan for in Beaver?

USGS maps Quaternary faults in the Beaver Basin, including one through town. We look at the site early and bring in a geotechnical engineer when the lot calls for it.

Can you build on land I already own in Beaver?

Yes. Many of our clients already own a lot. In your complimentary consultation we talk through your land, your wish list, budget and timing, and confirm what is realistic on your lot. If you are still looking for land, we can help you think through what to look for.

What does the complimentary consultation cover?

It is a 45-minute planning call with no obligation. We talk through your timeline, budget range and must-have features. You leave with a rough budget range, an estimated timeline and a recommended next step.

Nearby

Also building near Beaver

Summit builds custom homes in towns across a 50-mile radius of Cedar City. See every area we serve →

Ready to build in Beaver?

Book a complimentary, no-pressure 45-minute consultation. Bring your ideas, your lot or your questions, and leave with a budget range, a timeline and a clear next step.

Call Summit · 435.592.8200